top of page

Support Group

Public·23 members
Matthew Clark
Matthew Clark

Ficom Fiat Alfa Lancia Diagnostic Software [TOP]


FiCOM: A Comprehensive Solution for Fiat/Alfa/Lancia Diagnostics




If you own a Fiat, Alfa, Lancia or light Iveco vehicle, you may have encountered some difficulties in finding a reliable and affordable diagnostic tool that can communicate with your car's electronic control unit (ECU). Many of the generic OBD2 scanners on the market are not compatible with the specific protocols and buses used by these vehicles, and some of the official dealer tools are too expensive or complicated to use.




ficom fiat alfa lancia diagnostic software



Fortunately, there is a solution that can meet your needs: FiCOM. FiCOM is a diagnostic software that works with a smart OBD2 to USB interface to connect your PC or laptop to your car's ECU. FiCOM can perform a wide range of functions, such as fault code reading and clearing, live data recording, actuator tests, control unit coding, immobilizer key matching, injector coding, parameters resetting, proxi alignment, odometer correction and more.


What are the benefits of FiCOM?




FiCOM has many advantages over other diagnostic tools, such as:


  • It supports a wide range of ECUs and models from Fiat, Alfa, Lancia and light Iveco vehicles. It also covers other vehicles made in cooperation with Fiat such as Maserati, Ferrari or Ford Ka II. You can check the full ECU coverage listing here.



  • It comes with a smart OBD2 to USB interface that contains a multiplexer for both K-Line and CAN-BUS communication. This means that the interface works fully automatic without need to hassle with jumpers, switches or wires. It supports protocols such as KW71, KWP2000, ISO15765 with extended IDs and extended addressing.



  • It is very easy to use. The software has a user-friendly interface that allows you to select your vehicle model and ECU from a list or perform an automatic vehicle scan. It also provides detailed information about the ECU identification, fault codes, live data and actuator tests. You can also print diagnostic reports or save them as PDF files.



  • It is compatible with Fiat Examiner Smart, wiTECHplus and Iveco EASY/Eltrac where possible. This means that you can use FiCOM to perform some of the functions that are normally reserved for official dealer tools.



  • It is affordable and cost-effective. You can purchase FiCOM diagnostic interface and software for 389.00 EUR / $419.00 USD from OBDTester.com. You will also get a USB cable, a quickstart sheet and online software download. You can also order optional adapters if you need to diagnose vehicles without OBD2 socket.



How to use FiCOM?




To use FiCOM, you will need a PC or laptop running Windows XP/Vista/7/8/10 with at least 1GB of RAM and 100MB of free disk space. You will also need an internet connection to download the software and updates.


Here are the steps to use FiCOM:


  • Download and install FiCOM software from here. You will need to enter your license key during the installation process.



  • Connect the FiCOM interface to your PC or laptop using the USB cable.



  • Connect the FiCOM interface to your car's OBD2 socket using the appropriate adapter if needed.



  • Turn on the ignition of your car but do not start the engine.



  • Run FiCOM software and select your vehicle model and ECU from the list or perform an automatic vehicle scan.



  • Follow the instructions on the screen to perform the desired diagnostic functions.



Conclusion




FiCOM is a comprehensive solution for Fiat/Alfa/Lancia diagnostics that can help you diagnose and repair your car's problems quickly and easily. It is compatible with most of the ECUs and models from these brands and offers a wide range of functions that can rival some of the official dealer tools. It is also very easy to use and affordable compared to other diagnostic tools on the market.


If you are looking for a reliable and versatile diagnostic tool for your Fiat/Alfa/Lancia vehicle, you should definitely consider FiCOM as your first choice. You can order it online from OBDTester.com and enjoy its benefits right away.


How to order FiCOM diagnostic tool and software?




If you are interested in purchasing FiCOM diagnostic tool and software, you can order it online from OBDTester.com, the official distributor of FiCOM products. OBDTester.com offers a secure and convenient way to order FiCOM products and provides worldwide shipping and customer service.


To order FiCOM diagnostic tool and software, you need to follow these steps:


  • Visit OBDTester.com website and click on the "FiCOM" link on the menu bar.



  • Select the FiCOM product that suits your needs and click on the "Add to cart" button.



  • Review your shopping cart and click on the "Checkout" button.



  • Enter your billing and shipping information and choose your payment method.



  • Confirm your order and complete the payment process.



  • Wait for your order confirmation email and tracking number.



  • Receive your FiCOM product within a few days and enjoy its benefits.



OBDTester.com accepts various payment methods such as credit card, PayPal, bank transfer, Western Union and more. You can also choose from different shipping options such as standard, express or courier delivery. OBDTester.com also offers a 2-year warranty for all FiCOM products and a 30-day money back guarantee if you are not satisfied with your purchase.


How to contact OBDTester.com for support or inquiries?




If you have any questions or issues regarding FiCOM products or services, you can contact OBDTester.com for support or inquiries. OBDTester.com has a team of professional and friendly staff who are ready to assist you with any matter.


You can contact OBDTester.com by using one of the following methods:


  • Email: You can send an email to info@obdtester.com and expect a reply within 24 hours.



  • Phone: You can call +420 222 743 723 from Monday to Friday, 9:00 to 17:00 CET.



  • Skype: You can chat with obdtester.com on Skype during working hours.



  • Contact form: You can fill out the contact form on OBDTester.com website and submit your message.



OBDTester.com is always happy to hear from you and provide you with the best service possible. You can also visit OBDTester.com website for more information and FAQs about FiCOM products and services.


How to use FiCOM to perform common diagnostic functions?




FiCOM is a powerful and versatile diagnostic tool that can perform various functions to help you diagnose and repair your Fiat/Alfa/Lancia vehicle. Here are some of the common diagnostic functions that you can use FiCOM for:


  • Fault code reading and clearing: You can use FiCOM to read and clear the fault codes (DTCs) stored in your car's ECU. FiCOM will display the fault code number, description, status and freeze frame data. You can also print or save the diagnostic report as a PDF file.



  • Live data recording: You can use FiCOM to record the live data from your car's ECU. FiCOM will display the live data parameters such as engine speed, coolant temperature, throttle position, fuel pressure, oxygen sensor voltage and more. You can also graph the live data and export it as a CSV file.



  • Actuator tests: You can use FiCOM to test the actuators in your car's ECU. FiCOM will allow you to activate or deactivate the actuators such as injectors, coils, relays, fans, solenoids and more. You can also monitor the actuator status and feedback.



  • Control unit coding: You can use FiCOM to code or program your car's ECU. FiCOM will allow you to change the ECU settings such as language, country, VIN, immobilizer code, proxi alignment and more. You can also backup and restore the ECU configuration.



  • Immobilizer key matching: You can use FiCOM to match new or spare keys to your car's immobilizer system. FiCOM will allow you to read the PIN code from some of the ECUs and program new keys or transponders.



  • Injector coding: You can use FiCOM to code new or replaced injectors to your car's ECU. FiCOM will allow you to enter the injector codes or read them from the injectors.



  • Parameters resetting: You can use FiCOM to reset some of the parameters in your car's ECU. FiCOM will allow you to reset the service interval, oil life, throttle adaptation, steering angle sensor calibration and more.



What are some of the tips and tricks for using FiCOM?




FiCOM is a user-friendly and intuitive diagnostic tool that does not require much technical knowledge or experience. However, there are some tips and tricks that can help you use FiCOM more effectively and efficiently. Here are some of them:


  • Always make sure that your PC or laptop meets the minimum system requirements for running FiCOM software.



  • Always make sure that your FiCOM software and interface are updated to the latest version.



  • Always make sure that your car's battery is fully charged and that the ignition is turned on but the engine is not started before connecting FiCOM interface.



  • Always make sure that you select the correct vehicle model and ECU from the list or perform an automatic vehicle scan before performing any diagnostic function.



  • Always make sure that you follow the instructions on the screen carefully and do not disconnect or turn off anything during the diagnostic process.



  • Always make sure that you backup your ECU configuration before making any changes or coding.



  • Always make sure that you test your car's functions after performing any diagnostic function and clear any fault codes if needed.



How to compare FiCOM with other diagnostic tools?




FiCOM is not the only diagnostic tool available for Fiat/Alfa/Lancia vehicles. There are other diagnostic tools on the market that claim to offer similar or better features and functions. However, not all of them can match FiCOM's performance, compatibility and affordability. Here are some of the factors that make FiCOM stand out from other diagnostic tools:


  • FiCOM supports a wide range of ECUs and models from Fiat/Alfa/Lancia and light Iveco vehicles. It also covers other vehicles made in cooperation with Fiat such as Maserati, Ferrari or Ford Ka II. Some of the other diagnostic tools have limited or outdated ECU coverage and may not work with some of the newer or rare models.



  • FiCOM comes with a smart OBD2 to USB interface that contains a multiplexer for both K-Line and CAN-BUS communication. This means that the interface works fully automatic without need to hassle with jumpers, switches or wires. It supports protocols such as KW71, KWP2000, ISO15765 with extended IDs and extended addressing. Some of the other diagnostic tools have simple or generic OBD2 interfaces that may not support some of the protocols or buses used by Fiat/Alfa/Lancia vehicles.



  • FiCOM is very easy to use. The software has a user-friendly interface that allows you to select your vehicle model and ECU from a list or perform an automatic vehicle scan. It also provides detailed information about the ECU identification, fault codes, live data and actuator tests. You can also print diagnostic reports or save them as PDF files. Some of the other diagnostic tools have complex or confusing software that may require technical knowledge or experience to use.



  • FiCOM is compatible with Fiat Examiner Smart, wiTECHplus and Iveco EASY/Eltrac where possible. This means that you can use FiCOM to perform some of the functions that are normally reserved for official dealer tools. Some of the other diagnostic tools are not compatible with any of the official dealer tools and may not be able to perform some of the advanced functions.



  • FiCOM is affordable and cost-effective. You can purchase FiCOM diagnostic interface and software for 389.00 EUR / $419.00 USD from OBDTester.com. You will also get a USB cable, a quickstart sheet and online software download. You can also order optional adapters if you need to diagnose vehicles without OBD2 socket. Some of the other diagnostic tools are much more expensive or require subscription fees or annual updates.



Conclusion




FiCOM is a comprehensive solution for Fiat/Alfa/Lancia diagnostics that can help you diagnose and repair your car's problems quickly and easily. It is compatible with most of the ECUs and models from these brands and offers a wide range of functions that can rival some of the official dealer tools. It is also very easy to use and affordable compared to other diagnostic tools on the market.


If you are looking for a reliable and versatile diagnostic tool for your Fiat/Alfa/Lancia vehicle, you should definitely consider FiCOM as your first choice. You can order it online from OBDTester.com and enjoy its benefits right away.


Conclusion




FiCOM is a comprehensive solution for Fiat/Alfa/Lancia diagnostics that can help you diagnose and repair your car's problems quickly and easily. It is compatible with most of the ECUs and models from these brands and offers a wide range of functions that can rival some of the official dealer tools. It is also very easy to use and affordable compared to other diagnostic tools on the market.


If you are looking for a reliable and versatile diagnostic tool for your Fiat/Alfa/Lancia vehicle, you should definitely consider FiCOM as your first choice. You can order it online from OBDTester.com and enjoy its benefits right away. 6c859133af


https://soundcloud.com/senciasubszo/what-does-enscape-do

About

Welcome to the group! You can connect with other members, ge...

Members

Group Page: Groups_SingleGroup
bottom of page